Official Craftsman 917287260 front-engine lawn tractor parts (2024)

FAQs

What engine is on a Craftsman lawn mower? ›

Powered by a Briggs & Stratton 163cc EXi 725 Series™ Engine.

Riding mower model numbers are found by flipping the seat forward. The model number is printed on the left side of the Product Identification Label, attached to the underside of the seat, and starts with the letters, "CM".

The model number will be 11-12 characters long and can be found in one of many locations, including: by the starter, on the cylinder shield, on the metal shield, on the valve cover, above the spark plug, in front of the engine, above the muffler, or on the fuel tank.

Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug, as well as the fuel tank and the base of the engine block. Depending on the style of engine shroud used, the engine code numbers may be covered.

The lifespan of a well-maintained riding lawn mower typically falls in the range of 10 to 15 years. Several factors influence the longevity of these machines, including the frequency of use, maintenance practices, storage conditions, and the quality of the mower.

For batteries, you can find the date code on top printed or engraved directly on the plastic housing near the charging cells. It's six digits long and has a date format. For most of our chargers, you can find both the date code at the bottom of the unit.

Most of the time, you can find the Craftsman model and serial number on the top of the mower. If you were standing behind it and using it, the identification tag would be on the top rear portion of the deck, between the wheels.

MTD makes Craftsman lawn, yard, and garden tractors as well as our "professional" walk behind mowers.

Craftsman only used Kohlers and Briggs with a few Tec*msehs mixed in. The most important thing is the shaft needs to be the same size as the old engine so the pulley fits on. You can swap an engine in an afternoon, its not difficult as long as the shafts are similar and there is enough space.

In addition, Stanley Black & Decker had the option to acquire the remaining 80% of MTD starting July 1, 2021, which it did on August 17, 2021. Furthermore, with the acquisition of Craftsman by Stanley Black & Decker, the brand's products are now produced by MTD through this partnership.

What is the model number of my MTD engine? ›

The MTD model number can be found on your equipment's identification tag, located in one of several places on your machine. This tag is approximately 2'' x3'' in size and also includes the product name, customer service address, and phone number.

Knowing the model number of your Briggs & Stratton® ride engine will make it easy to order maintenance or repair parts online or from your local dealer. The engine model number is the first 12 characters stamped into metal directly on your engine in one of two locations - on the valve cover or an aluminum tag.

Model # 917377911 Official Craftsman 21" 6.75-hp rotary lawn mower.